Navigation

Latest Blogs

Rss
29 May / 2016

Lotus engraved

Published In: Works Hits: 271 Comment: 0
Lotus engraved, The lotus was taken from a drawing and edited, to make a drum shape beneath it.
The design is simple. 
 
Read more
26 Mar / 2015

Tea cup with filer

Published In: 3D printed items Hits: 538 Comment: 2

Material: PLA. This is eco-friendly material and decomposable.
Features: Tea leaves shall not be soaked in water for long. This cup simply solve this problem with a unique design and filter. After soaking for a good time, you can awry the cup to the other side for drinking. The cup looks as exquisite as woven art of works.
Color: golden.
Size: about 90x55mm (Top diameter and height) (volume: about 150mL)
 

Read more
Published In: Instructions Hits: 415 Comment: 0
THERE ARE SOME THINGS TO KEEP IN MIND WHEN CREATING 3D MODELS FOR PRINTING.
IT IS BEST TO FOLLOW THESE GUIDELINES TO MAKE SURE YOUR MODEL PRINTS NICELY.
Read more
Published In: Instructions Hits: 541 Comment: 1

When using conical flat drill bits to engrave, you will find it easily broken if not set right.
For different purposes or effects, you will need different specs of router bits. As for delicate engraving, you will find it heart-breaking when you see your tools broken during working. This will just waste time and money.To gurantee a good service life of your tools, you need some experiments to determine what kind of parameters would be ok for your purpose.
Read more
Published In: Instructions Hits: 443 Comment: 0
Heater Cartridge
The easiest way to limit the current in the heater cartridge is in the firmware.

In Marlin you could update configuration.h to be something like:
Code: #define PID_MAX 50
If that heats up too slowly you can (cautiously) increase the number 50 to something higher.

http://forum.e3d-online.com/viewtopic.php?f=7&t=2
Read more
Tayoutec CNC © 2017