5pcs ER25 collet clamping range 3.175-16mm for cnc routers
Applications:
Widely used in boring, milling, drilling, tapping, grinding, and engraving, and so on.
Features:
(1). Super high precision, 0.015mm.
(2). Materials: high grade spring steel, durable and wear-resistant;
(3). Strong holding force, wide clamping range;
Specifications:
SKU
Max.OD(mm)
ID(mm)
OL(mm)
Outside Diameter
Inside Diameter
Overall Length
05012503
26
3.175
34/35
05012504
26
4
34/35
05..
Applications:
For cnc motion limit control to guarantee secure working without hitting the sides. It will be better if this works with soft limit when you have set it up in Mach3. For more, you can check it out in Mach3 user manual...
CNC Router Machine Tool Setter Auto-Check Instrument for Mach3
Applications:
For CNC routers controlled by MACH3, etc.
Features:
Economical but good.
Specifications:
(1). Tool Setting Area Dia: 25mm
(2). Total Height: 20mm
(3). Equipped with crocodile clamp.
Usage:
In a word, connect the tool setter with the interface for tool setting on control board , and connect your engraving tool with GND on control board with a wire (you can use a crocodile clip to hold it).
Detailed explanation:
Usually, there is a tool setter interface on control board (breakout board). If not, you can select an idle parallel pin as one pole for tool setter. For example, if you want to use the 12th pin (usually on your control board, you can find this information abou..
CNC Router Machine Tool Setter Auto-Check Instrument for Mach3
Applications:
For CNC routers controlled by MACH3, etc.
Features:
Economical but good.
Specifications:
(1). Tool Setting Area Dia: 25mm
(2). Total Height: 20mm
(3). Equipped with banana plug.
Applications:
For CNC routers controlled by MACH3, etc.
Usage:
In a word, connect the tool setter with the interface for tool setting on control board , and connect your engraving tool with GND on control board with a wire (you can use a crocodile clip to hold it).
Detailed explanation:
Usually, there is a tool setter interface on control board (breakout board). If not, you can select an idle parallel pin as one pole for tool setter. For example, if you want to use the 12th pin (us..
PCI LPT card for printers, PCI card for Mach3, parallel port expansion card,mach3 PCI parallel port card
If your computer has no parallet port, you can plug this PCI card into the PCI slot to work with your PC or software.
Driver and turorials will be sent by email or by a download link.
Features:
1). Plug and Play, IRQ and I / O address automatically assigned.
2). No jumper, no switch, easily set and stable.
3). 32 bus, support the PCI 2.1 specification
4). High-speed I / O controller (16C550C or compatible UART)
5). Support Windows 98se/me/2000/XP/server 2003/XP 64 bits/Vista/ Linux/ Win7 32/64 bits.
6). Built-in SPP, PS2, EPP/ECP, compatible with IEEE 1284 Printing Protocol
7). Transfer rate : 1.5 Mbytes / sec
8). Built-in 16 Byte FIFO.
Applications:
For..