12pcs/set rounding correctors for wood bead making, wood bead rounding tools
Application:
1, For rounding wood bead (a bigger corrector OD for a smaller wood bead due to the coated diamond grain).
2, For glass hole drilling.
3, Not suitable for wood material with teech structure, not for polishing or peeling, for that purpose, pls use sand paper.
4, Work with electric grinder (dremel) or hand drill.
5, This set include 1pcs for each size, totally 12pcs.
Note: Inside diameter tollerance: 0.5-1mm (this is caused by polishing diamond grain on it) .
SKU
Corrector OD(mm)
For BD(mm)
Outside Diameter
For bead diameter
PC21608
8
6
PC21610
10
8
PC21612
12
10
PC21614..
3pcs/set Bird mouth router bits for wood joints
Applications:
Used for polyhedron interface cutting. By using the bird mouth router bits, wood products, such as flowerpot, pillar, wooden barrel, can be made more easily.
Material: carbide tip
Note: 1 set include 6-sided, 8 and 12-sided bits. One piece per size.
You can also order 3pcs for only one size and leave note to us if there is no option available.
Specifications:
SKU
Shank
Cutter Diam.
Cutter Height
Angle
# of Sides
TNZDD12-6
1/2"(12.7mm)
47.6mm
34.9mm
30/60
6
TNZDD12-8
1/2"(12.7mm)
44.5mm
28.6mm
45
8
TNZDD12-12
..
3pcs/set Bird mouth router bits for wood joints (smaller size)
Applications:
Used for polyhedron interface cutting. By using the bird mouth router bits, wood products, such as flowerpot, pillar, wooden barrel, can be made more easily.
Material: carbide tip
Note: 1 set include 6-sided, 8 and 12-sided bits. One piece per size.
You can also order 3pcs for only one size and leave note to us if there is no option available.
Specifications:
SKU
Shank
Cutter Diam.
Cutter Height
Angle
# of Sides
TNZDX12-6
1/2"(12.7mm)
41.3mm
25.4mm
30/60
6
TNZDX12-8
1/2"(12.7mm)
38.1mm
25.4mm
45
..
Wood bead drill bits for bracelet, bench drill bits for hand chain
Material: solid carbid
Application:
hard wood, such as red wood,etc.
For making wood bead of certain diameter with a hole.
Not suggested on hand drill since its position is not stable, this tool is suggested to be used on bench drill (at least 250w, around 1000RMP).
When drilling on hard wood, lift it after drilling for a while since the needle inside is very slim, it has very limited chip removing performance.
Do not drop it on the ground, otherwise it might be damaged.
SKU
SHK(mm)
BD(mm)
HD(mm)
Shank Diameter
Bead diameter
Hole diameter
WB2160601
10
6
1.5
W..